Brother FAX2820 - Manual (Page 67)

6 - 1
6
Setting Remote Fax
Options
Note
■
You can only use one remote fax option at
a time:
Fax Forwarding—OR—Paging—OR—
Fax Storage—OR—PC FAX Receive*
—OR—Off.
*MFC-7220 and MFC-7225N only
■ If received faxes are still in the machine’s
memory when you change the remote fax
options, an LCD question will appear.
(See Changing Remote Fax Options
(MFC-7220 and MFC-7225N only) on
page 6-4.)
Setting up Fax Forwarding
When you select Fax Forward, your machine
stores the received fax in the memory. The
machine will then dial the fax number you’ve
programmed and forward the fax message.
1
Press Menu/Set, 2, 5, 1.
.
2
Press
▲ or ▼ to select Fax Forward.
Press Menu/Set.
The LCD will ask you to enter the fax
number to which faxes will be
forwarded.
3
Enter the forwarding number (up to 20
digits).
Press Menu/Set.
4
Press
▲ or ▼ to select
Backup Print:On or
Backup Print:Off .
.
Press Menu/Set.
Note
If you select Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case there is a power failure
before the fax is forwarded or a problem at
the receiving machine. The FAX-2920 and
MFC-7225N can store faxes up to 4 days if
there is a power failure. The faxes stored in
the FAX-2820 and MFC-7220 memory will be
deleted.
5
Press Stop/Exit.
Remote Fax Options
1.Fwd/Page/Store
Backup Print:On