Philips Dampfbügelstation - Manual (Page 18)

Problem Cause Solution
Wet spots appear
on the fabric during
ironing.
The wet spots that appear on the fabric
after you have steam ironed for some
time may be caused by steam that has
condensed onto the ironing board. Iron
the wet spots without steam for some
time to dry them. If the underside of the
ironing board is wet, wipe it with a piece
of dry cloth.
To prevent steam from condensing
onto the ironing board, use an
ironing board with a wire mesh top.
iron display guide (Fig. 2)
Temperature settings suitable for specific fabric types.
Action Option Message in English
Switching on the appliance WELCOME TO PHILIPS - CHECKING
SENSORS - CHECKING WATER -
WARMING UP
Using the menu button (see
section ‘Display menu’)
Switching the steam lock
on or off
STEAM LOCK - ON - OFF -
CONFIRMED
Setting the iron-off time IRON OFF - 5 MIN - 10 MIN - 20 MIN
- 30 MIN - CONFIRMED
Switching the sound on
or off
SOUND - ON - OFF - CONFIRMED
Choosing a language LANGUAGE - ENGLISH - DUTCH
- FRENCH - GERMAN - PORTUGUESE
- SPANISH - ITALIAN - CONFIRMED
Setting the water hardness WATER HARDNESS - SOFT - MEDIUM
- HARD - CONFIRMED
The iron switches off after the
iron-off time has elapsed (see
section ‘Iron-off function’)
IRON OFF - STANDBY - PRESS ANY
KEY TO RESUME
Pressing the + and - buttons
(see section ‘Setting the
temperature’)
Choosing the fabric type ACETATE - ACRYLIC - VELVET - NYLON
- SILK - VISCOSE - POLYESTER - WOOL
- RAYON - COTTON - JEANS - LINEN
The iron heats up because
you have selected a
different fabric type
WARMING UP
The iron cools down
because you have selected
a different fabric type
COOLING
The iron has reached the
correct temperature for
selected fabric type
TEMP OK
-
EnGlish
18