Steam lock function, Vertical steaming, Ironing without steam – Philips Dampfbügelstation User Manual

Page 11

Set the required steam setting with the + and - buttons on the steam

generator control panel.

for maximum steam (temperature setting MAX).

[

for moderate steam (temperature settings 3 to MAX).

]

for minimum steam (temperature settings 2 to MAX).

for no steam (temperature settings 1 to MAX).

The steam light flashes to indicate that the steam generator is

heating up.

After approx. minutes, the steam light stays on continuously to

indicate that the steam generator is ready for steam ironing.

Note: During ironing, you can adjust the steam setting with the + and - steam

buttons. It takes a few moments before the amount of steam is adjusted.

Press the steam trigger to start steam ironing.

When you put down the iron during ironing, put it on its heel or on the

iron stand.

The opening and closing of the steam valve in the steam generator

causes a clicking sound. This is normal.

steam lock function

The steam lock allows you to steam iron non-stop without having to press

the steam trigger continuously.

When the steam lock function is set to ‘on’ (the default setting in the

display menu), the iron produces steam continuously when you press

the steam trigger once. To stop steaming, press the steam trigger once

again.

When the steam lock function is set to ‘off’ (see section ‘Display

menu’), the iron only produces steam when you press the steam trigger.

Note: Release the steam lock when you put the iron on its heel or on the iron

stand. This prevents that hot steam escapes from the iron or that the iron

stand gets wet.
vertical steaming
Never direct the steam at people.

Hold the iron in vertical position and press the steam trigger to

steam iron hanging curtains and clothes (jackets, suits, coats).

ironing without steam
There are two ways to iron without steam:

Simpy start ironing without pressing the steam trigger.

Select steam setting a (no steam) and start ironing.

EnGlish