Philips Dampfbügelstation - Manual (Page 10)

If you set a lower temperature during ironing, wait until the iron has
cooled down to the set temperature before you continue ironing. To
make the iron cool down faster, simply press the steam trigger or iron
a piece of cloth.
Display menu
The GC8280 offers 5 functions that allow you to adjust the settings of the
appliance to your own preferences.
These functions are listed in a menu. Press the menu button and the +
and - buttons on the iron to use the menu.
The menu structure of these functions is the following (the default
settings are shown between brackets):
1 Steam lock (on)/off
2 Iron off: 5/10/20/(30) minutes
3 Sound: (on)/off
4 Language: (English)/Dutch/French/German/Italian/Spanish/Portuguese
5 Water hardness: soft/(medium)/hard
To select your preferred settings:
1 Press the menu button for 1 second.
Use the + and - buttons on the iron to scroll through the available
settings.
When you have reached the setting of your choice, press the menu
button again. The message ‘CONFIRMED’ appears on the display.
To exit the menu, wait seconds.
using the appliance
steam ironing
The supply hose may become hot during a long ironing session.
Note: The system may occasionally produce a pumping sound during steam
ironing. This is normal and tells you that water is pumped into the steam
generator.
1 Make sure there is enough water in the water tank.
Put the mains plug in an earthed wall socket and press the on/off
button once.
Set the required ironing temperature (see chapter ‘Preparing for
use’).
Steam ironing is only possible at ironing temperatures higher than 2. The
steam function is automatically disabled at ironing temperatures lower than
2
.
-
-
-
On On
EnGlish
10