Black Box FX150A - Manual (Page 42)

43
LINESHARE PRO
If you do not want the Ring
Reduction feature to reduce the ring
count on the primary default port,
you can turn the feature OFF.
The feature is factory-preset ON,
1 8 *. To turn the Automatic Ring
Reduction feature OFF, enter the
programming mode and press the
following on your tone phone:
0 Turn OFF
8 Automatic Ring Reduction
* End programming sequence (3
beeps indicate correct entry)
(Optional entries for additional
changes)
* Save changes and exit
programming
[9] Outbound Tone Transfer
Outbound Tone Transfer operates
only when the Lineshare Pro is
configured in the non-secured
mode.
This feature enables you to
manually transfer an outbound call
from the primary default port to
another port using your tone-type
phone.
The Outbound Tone Transfer is
factory preset OFF, 0 9 *.
To turn the Outbound Tone
Transfer ON, enter the
programming mode and press the
following on your tone phone:
1 Turn ON
9 Outbound Tone Transfer
* End programming sequence (3
beeps indicate correct entry)
(Optional entries for additional
changes)
* Save changes and exit
programming
5.5 Changing Function Options
Earlier in this chapter, Table 5-2
listed the functions that can be
altered to customize the operation
of the Lineshare Pro.
The functions are [2] [1] through
[9] [9] [9]. In this section you will
find a description of each function
and instructions for customizing the
function.