Black Box FX150A - Manual (Page 41)

42
LINESHARE PRO
When ON, this feature is typically
used when all the phones are wired
directly to the primary default port
of the Lineshare Pro. If you pick up
a phone connected to the primary
default port, and hear a busy tone
indicating that a device on another
port is on the line, simply hang up
the phone. After the other device
releases the line, OLN signals the
phone devices connected to the
primary default port with a short
ring. You now have an open
telephone line to make a call.
The OLN feature is factory-preset
OFF, 0 6 *. To turn the OLN feature
ON, enter the programming mode
and press the following on your tone
phone:
1 Turn ON
6 Open Line Notification
* End programming sequence (3
beeps indicate correct entry)
(Optional entries for additional
changes)
* Save changes and exit
programming
[7] Inbound Tone Transfer
Inbound Tone Transfer operates
only when the Lineshare Pro is
configured in the non-secured
mode.
This feature enables you to
manually transfer an inbound call
from the primary default port to
another port using your tone-type
phone. (The setting of this feature
does not affect an inbound
computer call using access codes.)
The Inbound Tone Transfer is
factory preset OFF, 0 7 *. To turn
the Inbound Tone Transfer ON,
enter the programming mode and
press the following on your tone
phone:
1 Turn ON
7 Inbound Tone Transfer
* End programming sequence (3
beeps indicate correct entry)
(Optional entries for additional
changes)
* Save changes and exit
programming
[8] Ring Reduction
Ring Reduction is designed mainly
to accommodate auto-dial faxes that
do not produce CNG tones.
During unattended hours, if your
phones aren’t answered by the sixth
ring (primary default port ring
count), the Lineshare Pro automati-
cally reduces the number of rings
available to the primary default port
to two. The next time a call is
answered and routed to the primary
default port, the Lineshare Pro will
only ring the primary default port
two times and then route the call to
the next port in the Cascade Port
Order.