Brother DCP-8085DN - Manual (Page 110)

Troubleshooting and routine maintenance
103
C
f
Put the drum unit and toner cartridge
assembly into a plastic bag and seal the
bag.
g
Close the front cover.
h
Put the styrofoam piece marked
“FRONT” into the original carton (1).
Pack the drum unit and toner cartridge
assembly (2) and put it in as shown
below (3). Wrap the machine in the
plastic bag and put it in the original
carton (4). Put the printed material
behind the machine (5).
i
Take the two styrofoam pieces and
match the front of the machine to the
“FRONT” mark on the one of the
styrofoam pieces, and the back of the
machine to the “REAR” mark on the
other styrofoam piece (6). Put the AC
power cord and printed materials in the
original carton as shown below (7).
j
Close the carton and tape it shut.