Brother MFC J220 - Manual (Page 9)

9
8
Set the LCD contrast
(if needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press a or b to choose General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose LCD Contrast.
Press OK.
e
Press d or c to choose the contrast level.
Press OK.
f
Press Stop/Exit.
9
Set the date and time
The machine displays the date and time, and if you
set up the station ID the date and time will be added
to each fax you send.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Date&Time.
Press OK.
d
Enter the last two digits of the year on the dial
pad, and then press OK.
e
Enter the two digits for the month on the dial
pad, and then press OK.
f
Enter the two digits for the day on the dial pad,
and then press OK.
g
Press a or b to choose 12h Clock or
24h Clock, and then press OK.
h
Enter the time on the dial pad, and then press
OK.
i
(12h Clock only)
Press a or b to choose AM or PM, and then press
OK.
j
Press Stop/Exit.
(e.g. Enter 1 0 for 2010.)
Year:2010
12 or 24 ?
12h Clock
24h Clock
AM or PM ?
PM
AM