Brother MFC J220 - Manual (Page 11)

11
12 Set Tone or Pulse dialing
mode
(Canada only)
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Tone/Pulse.
Press OK.
d
Press a or b to choose Pulse (or Tone).
Press OK.
e
Press Stop/Exit.
13
Set the phone line
compatibility
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
compatibility setting.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Compatibility.
Press OK.
d
Press a or b key to choose
Basic(for VoIP).
Press OK.
e
Press Stop/Exit.
14
Automatic Daylight
Savings Time
You can set the machine to change automatically for
daylight savings time. It will reset itself forward one
hour in the spring and backward one hour in the fall.
a
Press Menu.
b
Press a or b to choose General Setup.
Press OK.
c
Press a or b to choose Auto Daylight.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.
e
Press Stop/Exit.
15 Send in the Product
Registration Sheet
(USA only)
You can also register your product online using the
On-Line Registration link from the installation
CD-ROM or visit
http://www.brother.com/registration/
a
Fill out the Product Registration Sheet.
Note
If you are using an analog telephone line you can
skip this step.