3 audio connections – Behringer MX882 User Manual

Page 8

ULTRALINK PRO MX882

3.3 Audio connections

The audio inputs and outputs on the BEHRINGER ULTRALINK PRO are fully balanced. If possible, connect the

unit to other devices in a balanced configuration to allow for maximum interference immunity.

Unbalanced use of
mono 1/4" jack plugs

Ring

Balanced use of
stereo 1/4" jack plugs

Balanced use with XLR connectors

Input

Output

Tip =
Signal

Tip =
hot (+ve)

Sleeve =
Ground / Shield

Tip

Sleeve

Strain relief clamp

Ring =
cold (-ve)

For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.

1 = Ground / Shield
2 = hot (+ve)
3 = cold (-ve)

For unbalanced use pin 1 and pin 3 have to be bridged

Fig. 3.1: Different plug types

Please ensure that only qualified persons install and operate the ULTRALINK PRO. During

installation and operation the user must have sufficient electrical contact to earth. Electro-

static charges might affect the operation of the ULTRALINK PRO!

3. INSTALLATION