Boss Audio Systems ME-20 - Manual (Page 7)

7
Names of Things and What They Do
Front Panel
fig.ME-20-front-panel.eps_70
1. Parameter Knobs
These adjust parameters selected with the effect buttons and EZ EDIT button.
You can check a parameter’s current value by holding down its effect select button
and turning the knob (this displays the value without adjusting it).
3
4
7 8
10
11
12
13
14
15 16
1
2
5
6
9
You can change how the knobs respond when turned.
1. Switch to Manual mode (p. 23).
2. Hold down the [EDIT/EXIT] button and press Number Pedal 1.
One of the following appears in the display.
n0:
The value changes immediately as the knob is turned (factory setting).
n1: The value changes once the knob is turned past the position
corresponding to the currently set value.
3. Press [ ][ ] to change the value of the setting as desired.
4. Press [WRITE]. The setting is saved, and the ME-20 returns to Manual mode.
ME-20_e.book 7 ページ ２００７年９月１０日 月曜日 午後６時２２分