Boss Audio Systems ME-20 - Manual (Page 19)

19
Introduction to Effects and Parameters
DELAY
These are spatial effects that let you to do things like make the sound thicker or create special
effects by adding delayed sound or reverb to the input sound.
DELAY Type List
fig.FX-DELAY.eps_50
fig.FX-DELAY2.eps_90
TYPE Descriptions
1: 0 – 99 ms DELAY Delay sound with a delay time from 0 to 99 ms.
2: 100 – 700 ms DELAY Delay sound with a delay time from 100 to 700 ms.
3: REVERB An effect that adds reverberation to the sound.
Descriptions 1: 0 – 99 ms DELAY The delay time can be
set in increments of 1
ms. Adjusts the number
of repeats of the de-
lay sound. Turning
the knob to the right
increases the number
of times the delay is
repeated. Adjusts the volume
of the effect sound.
2: 100 – 700 ms
DELAY
The delay time can be
set in increments of
10 ms.
In the display, the
value is shown as the
number of 10 ms
units (10 – 70).
3: REVERB Adjusts the length
(reverb time) of the
reverberation. Adjusts the tone
quality of the rever-
beration. Turning the
knob to the right cre-
ates a brighter sound.
ME-20_e.book 19 ページ ２００７年９月１０日 月曜日 午後６時２２分