Boss Audio Systems ME-20 - Manual (Page 29)

29
Other Functions
Returning the ME-20 to Its Factory Settings (Factory Reset)
You can restore the settings stored in the ME-20 (User memory, tuner reference pitch, and knob
response method (p. 7)) to their original settings when the unit was shipped from the factory.
This is referred to as “Factory Reset.”
To perform a Factory Reset, carry out the following steps.
fig.ME-20-factory-reset.eps_55
1. Switch to Manual mode (p. 23).
2. Hold down [EDIT/EXIT] and press Number Pedal 2.
“FA” appears in the display.
3. Press [WRITE].
The MEMORY indicator flashes and the unit goes into standby.
* To cancel the Factory Reset, press [EDIT/EXIT] again to return to the original mode.
4. Press [WRITE].
The Factory Reset is carried out.
When the Factory Reset is complete, the display goes dark and the unit returns to
Manual mode.
Never turn off the power while a Factory Reset is in progress.
2 3,4
ME-20_e.book 29 ページ ２００７年９月１０日 月曜日 午後６時２２分