BT 610 - Manual (Page 44)

Dialling mode
Your BT Freestyle 610 is set to tone dialling. If required
you can switch it to pulse dialling.
1. Press .
2. Press or until SETUP is displayed then press
.
3. Press or until DIAL MODE is displayed then press
.
4. Press or to select either TONE DIAL or PULSE
DIAL then press .
5. Press twice to return to the idle screen.
Temporary change to tone dialling mode
If you have set your BT Freestyle 610 to Pulse dialling,
you can temporarily switch to Tone dialling during a call.
1. Press , then press , then dial the number as
normal.
Your BT Freestyle 610 will switch to Tone dialling only for
the duration of this call.
2. Press and hold before you store the number in the
phonebook. * is displayed.
44 Switchboard use
Freestyle 610 – Edition 3 – 07.04.06 – 7332
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]