BT 610 - Manual (Page 34)

You cannot de-register the handset
you are using. One handset must
remain registered to the base at
any time.
If you enter a handset number that
does not exist, you will hear a beep
tone.
The default setting is 1.
De-register a handset from the base
1. Press .
2. Press or until SETUP is displayed then press
to select.
3. Press or until DEL HANDSET is displayed then
press to select.
4. PIN? is displayed, enter your 4 digit PIN then press
. HANDSET ? is displayed.
5. Enter the handset you want to de-register then press
.
6. Press twice to return to the idle screen.
Base ringer melody and volume
You have a choice of 3 melodies and 3 volume levels (or
volume OFF).
To change the ringer melody
1. Press .
2. Press or until SETUP is displayed then press
to select.
34 Base settings
Freestyle 610 – Edition 3 – 07.04.06 – 7332
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]