BT 610 - Manual (Page 33)

Security PIN
Your BT Freestyle 610 has a security PIN code which you
will need to change some of the base settings. The
default setting is 0000. You may want to change this to
prevent unauthorised changes to your settings.
To change the base PIN code
1. Press .
2. Press or until SETUP is displayed then press
to confirm.
3. Press or until PIN CODE is displayed then press
to confirm. PIN? is displayed.
4. Enter your old 4 digit PIN then press . NEW PIN is
displayed.
5. Enter your new 4 digit PIN then press . RETYPE is
displayed.
6. Enter your new 4 digit PIN again for verification then
press . The handset beeps to confirm.
7. Press twice to return to the idle screen.
Freestyle 610 – Edition 3 – 07.04.06 – 7332
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
Base settings
33
To exit and return to the idle
display at any time, press
repeatedly.
The default setting is 0000.
You can make a note of your new
base PIN using the space provided
on page 50.