BT 610 - Manual (Page 28)

The default setting is 3.
To change the internal ringer volume
1. Press .
2. Press or until HANDSET is displayed.
3. Press .
4. Press or until INT RING VOL is displayed then
press . The current setting is played.
5. Press or to select a volume then press .
The handset gives a confirmation tone.
6. Press repeatedly to return to the idle screen.
Key beeps
Your BT Freestyle 610 handset emits beeps to alert you
to certain situations. You can set the handset to beep:
1. If the battery is low.
2. If you go out of range of the base.
3. To beep as confirmation each time a handset button
is pressed.
These beeps can be switched ON or OFF.
However, beeps which confirm settings cannot be
switched off.
28 Handset settings
Freestyle 610 – Edition 3 – 07.04.06 – 7332
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]