BT 610 - Manual (Page 36)

Reset the handset and base
1. Press .
2. Press or until SETUP is displayed then press
to select.
3. Press or until DEFAULT is displayed then press
to select. PIN? is displayed.
4. Enter your 4 digit PIN then press . Display will show
CONFIRM? Press to select. Your BT Freestyle 610
will reset itself to the default settings.
Reset if you have forgotten your PIN code
1. Press and hold to switch the handset off and remove
the handset batteries.
2. Press and hold as you replace the batteries. Wait
until the display shows DEFAULT .
3. Press to confirm. After a few seconds the base will
beep and the handset and base will reset automatically.
36 Base settings
Freestyle 610 – Edition 3 – 07.04.06 – 7332
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
WARNING
If you reset the handset and base,
you will lose any names or
numbers stored in the phonebook,
redial list and calls list.