Brother PE 150 User Manual
Page 30
27
5. Select a pattern.
4. Turn on the power. The light will shine when
the power is turned on.
3. Place the fabric in the embroidery frame and
then attach the frame to the machine.
(See page 20 – 22)
1
Carriage (embroidery arm)
2
Embroidery frame
NOTE
Do not push down the carriage too hard as you
attach the hoop. Use caution so as not to move
the carriage sideways.
*
It is easier to move the embroidery frame
under the presser foot if the presser foot lever
is raised higher than its normal “up” position.
1
Normal presser foot lever “up” position
2
Presser foot lever pushed up
3
Presser foot lever down position
6. Lower the presser foot lever and press the
“START/STOP” button to start the machine.
1
“START/STOP” button
See also other documents in the category Brother Sewing machines:
- XL 2600i (82 pages)
- PE-770 (88 pages)
- PE-770 (2 pages)
- PE-770 (40 pages)
- SE-400 (16 pages)
- LS-2125i (2 pages)
- LS-2125i (67 pages)
- CS-6000i (68 pages)
- CS-6000i (2 pages)
- CE-5000PRW (68 pages)
- LX-3125 (96 pages)
- SE-400 (24 pages)
- 3034D (2 pages)
- 3034D (76 pages)
- HE 120 (183 pages)
- Innov-IS 500D (12 pages)
- CS 80 (115 pages)
- CS-8060 (116 pages)
- NX-400 (153 pages)
- PC-420 (153 pages)
- NX-200 (111 pages)
- PC-210 210PRW (2 pages)
- PC-210 210PRW (111 pages)
- Innov-IS 4000D (8 pages)
- Boutique 27 37 (111 pages)
- 2340CV (40 pages)
- 2340CV (21 pages)
- DS-120 (100 pages)
- PE-700II 750DUSB (40 pages)
- NX-2000 (88 pages)
- NX-2000 (2 pages)
- Innov-is 2200 (48 pages)
- NX-2000 (40 pages)
- 885-X08 (104 pages)
- PR-600 600C (20 pages)
- INNOVIS 500 (8 pages)
- PS-21 (46 pages)
- PC 6500 (140 pages)
- PE-750D (40 pages)
- XL-6061 (101 pages)
- XL-5051 (45 pages)
- BAS-326F-0 (81 pages)
- CS 100T (67 pages)
- EX 660 (67 pages)
- XL-5010 5020 5030 (82 pages)