BT PARAGON450 - Manual (Page 7)

Connect handset cord to base
1. Plug the handset cord into the socket marked HANDSET on the
underside of the base.
Connect the telephone line cord
1. Plug the telephone cord into the socket marked LINE on the underside
of the base. Then plug the other end into the telephone wall socket.
Getting started 7
BT Paragon 450 – Edition 05 – 02.11.04 – 5995
HANDSET
LINE
9V DC
T
TB
HEADSET
If you plan to use the phone on a table or
similar flat surface, route the line cord as
shown.
If you plan to wall-mount the phone, route
the cords in the opposite direction.
HANDSET
LINE
9V DC
T
TB
HEADSET
5995 BT Paragon 450 UG [5] 2/11/04 4:36 pm Page 7