BT PARAGON450 - Manual (Page 18)

BT Paragon 450 – Edition 05 – 02.11.04 – 5995
M1-M3 one-touch buttons
You can dial up to three numbers by pressing just one button.
Store
1. Enter the number you want so it is displayed on the screen.
2. Press and hold the - button you want until the display
shows MEMORY X STORED .
Dial
1. Lift the handset or press or press then press the
- button you want. The number is dialled.
Edit
1. To change a one-touch dial number, simply overwrite the current number
by storing a new one.
Delete
1. Press and hold the - button you want until the display
shows MEMORY X DELETED .
Memory 3 Memory 1
Memory 3 Memory 1
Headset
Memory 3 Memory 1
18
To enter a Pause in a stored number, press
. The display shows P. A pause is
normally used to allow a switchboard/PBX
time to get an outside line before the number
is dialled, see page 40.
If you have also stored the same one-touch
number in the directory along with a name,
the name is displayed when you have dialled
the number.
-
Memory 3 Memory 1 5995 BT Paragon 450 UG [5] 2/11/04 4:36 pm Page 18