BT PARAGON450 - Manual (Page 30)

30
BT Paragon 450 – Edition 05 – 02.11.04 – 5995
Message playback
You can play messages whether the answering machine is switched on
or off.
You can listen to messages over the loudspeaker. Lift the handset to
hear them on the handset or press
to hear them on a headset.
New messages are played first. As soon as they have been played back,
they are stored as old messages.
If there are no messages, the prompt announces “You have no messages”.
1. Press . The time the message was received is displayed.
During playback:
Press twice to play the previous message.
Press to play the next message.
Press to delete the message.
Press then or to adjust the volume.
Press to pause playback, press again to resume.
Delete all old messages
1. During standby, press . The display shows DELETE ALL? Press
again. The display shows MESSAGE DELETED .
Memory full
When the recording memory is full, your BT Paragon 450 automatically
switches to Answer Only and the display will show
ANSWER ONLY . You
must delete stored messages before you can take new ones.
If the memory becomes full during a call, the caller will hear the
announcement “Memory full, thank you for calling” and the answering
machine will hang up.
Delete Delete
Pause
Play
Pause
Play
ᮣ ᮤ Volume
Delete
ᮣ
ᮤ
Pause
Play
Headset
Answering machine
You can pause playback for up to 60 seconds.
If playback is not resumed, your BT Paragon
450 will return to standby.
5995 BT Paragon 450 UG [5] 2/11/04 4:36 pm Page 30