BT PARAGON450 - Manual (Page 31)

Answer Delay
Answer delay sets the number of times your BT Paragon 450 will ring
before the answering machine picks up your call. The default setting is
6 rings. You can change this setting to 2-9 rings or Time Saver.
Time Saver can save you the cost of a call when you want to ring in to
find out if you have new messages.
If your answering machine answers after 2 rings, you have new messages.
If you have no new messages it will answer after 6 rings. So if you hear
a third ring, you can hang up before you are connected, saving you the
cost of a call.
1. Press then scroll to ANSWER SETTING and press .
2. Scroll or to display ANSWER DELAY . Press to display the
current setting.
3. Scroll or through the settings and press to select the
displayed option.
Call screening
You can listen while your answering machine takes a call. This lets you
identify the caller and decide whether to take the call yourself.
Make sure the volume on the base is set loud enough to hear, see page 27.
1. Switch on the answering machine. When it answers a call you can listen
to the caller. If you want to take the call yourself, lift up the handset and
speak or press
or . Recording stops automatically and you
can speak to your caller.
2. Adjust the loudspeaker volume by pressing then or . ᮣ ᮤ Volume
Headset
OK ᮣ ᮤ
OK ᮣ ᮤ
OK Menu
Answering machine 31
BT Paragon 450 – Edition 05 – 02.11.04 – 5995
5995 BT Paragon 450 UG [5] 2/11/04 4:36 pm Page 31