Storage of additional functions with cut size, Subsequent storing of additional functions – Baumfolder Baumcut Programmable 26.4 User Manual
Page 80
K5C - 2
1.
Enter cut size
2.
Press key
< additional function menu is opened >
3.
Enter number of desired Additional Function
4.
Press key
< for identifying the stored Additional Function the symbol is
displayed behind the step number >
1.
Select program
< program data display appears >
2.
Select step number
3.
Press key
"Correction"
4.
Press key
< add. function menu is displayed >
5.
Enter number of desired Additional Function
< symbol is displayed in input section >
6.
Press key
"Enter"
< additional function is stored; symbol is displayed behind the step
number >
Erase Additional Function:
Repeat above procedure
Storage of Additional Functions with Cut Size
5.0 Automatic Operation
Additional functions:
Subsequent Storing of Additional Functions
Ejector OFF
Jogging mark