Baumfolder Baumcut Programmable 26.4 - Manual (Page 46)

K5A - 12
5.0 Automatic Operation
Selecting a Program
Example: Possible in all 4 basic monitor displays!
Two calling modes:
A. According to program number
B. According to order number/order name
A. According to Program number:
1. Press key "Program selection" < menu appears >
2. Select "program number" with key
3. Enter desired program number
4. Press key
< program data display of selected program appears >
B. According to order number:
Note: Previous storing of order number/order name to a program is
conditional (see "Storing of program information", page K5A - 20)
1. Press key "Program selection" < menu appears >
2. Select "Order" < alpha keyboard appears on display >
3. Enter order number/order name via softkey selection