Blaupunkt QUEENS MP56 7 646 583 310 User Manual

Page 42

Changing basic settings in the settings menu

107

GLISH

DEUT

SCH

FRAN

AIS

ALIAN

NEDERLANDS

Creating/changing a user-deﬁ ned equalizer setting ( ADJUST)

You can adjust the three different user-deﬁ ned equalizer settings to
different situations, e.g. for the driver alone, for driver and passenger
or for passengers in the front and the rear.

Select the user-deﬁ ned equalizer setting which you want to create/
change as described in the preceding section.

Press the softkey

(next to "ADJUST"). The "USER EQ ADJUST"

menu opens.

ADJUST

USER EQ-1 ADJUST

MANUAL

DEQ

MAXEX

AUTO

PLACE MICRO 5

BREAK

80 Hz +11db Q1

LOW1
LOW2
HIGH1

HIGH2
HIGH3
HIGH4

➔

AUTO :

You can automatically create one
of the three equalizer settings us-
ing a measurement microphone
(available as an accessory).

Before starting, ensure the fol-
lowing:

The measurement microphone
must be connected before in-
stalling the device as described
in the installation instructions
of the measurement micro-
phone.

There must be true silence dur-
ing the measurement since ex-
ternal noise falsify the meas-
urement. For this reason, close
all windows, doors, and the
sliding sunroof.

•

Switch off the engine, but
leave the ignition switched on.

The temperature inside the ve-
hicle must be below 55 °C.

All the loudspeakers must be
connected. The sound radi-
ating from the loudspeakers
must not be obstructed by any
objects.

Position the measurement mi-
crophone

for the driver only – 10 cm
next to the right ear of the
driver,

for driver and passenger –
exactly between both at the
head level,

•

➔

•

02_BA_Queens_1_GB.indd Menü107

04.09.2006 11:00:58 Uhr