Blaupunkt QUEENS MP56 7 646 583 310 User Manual

Page 21

Operating the tuner

"PROG TYP" menu, the tuner
automatically searches the
next station broadcasting
this program type in the se-
lected direction. For this
purpose, the station must
be broadcasting the corre-
sponding PTY identiﬁ cation
as RDS service.

If you activated the automat-
ic change to alternative fre-
quencies in the "RDS" menu,
the tuner searches for the
same station on a different
frequency.

If you selected the "PTY OFF"
option in the "PROG TYP"
menu and deactivated the
automatic change to alterna-
tive frequencies in the "RDS"
menu, you can manually ad-
just the tuner in increments
of 100 kHz.

As soon as a station has been
located, it is played. The station
name appears on the main line

after a few seconds if the station
provides this RDS information.

You can now store this station
(see page 87) or restart the man-
ual station seek tuning.

•

Automatically searching for
stations

While the tuner display ap-
pears, press on or on the
rocker switch

The tuner searches for the next
station in the current wave-
band in the selected direction.
The settings in the menus
"SENS" (see page 90) and
"PROG TYP" (see page 92) are
incorporated.

As soon as a station is located,
the seek tuning stops and the lo-
cated station is played. The sta-
tion name appears on the main
line

after a few seconds if the

station provides this RDS infor-
mation.

You can now store this station
(see p. 87) or restart the auto-
matic station seek tuning.

Note:
If you press and hold or on
the rocker switch

, the auto-

matically seek tuning skips the
stations found until you release
the rocker switch again.

➔

02_BA_Queens_1_GB.indd Tuner86

04.09.2006 11:00:55 Uhr