BenQ W20000 - Manual (Page 9)

9 Overview
Eng
lish Controls and functions
Control panel
7. Keystone / Left-arrow button
Keystone / Right-arrow button
Manually corrects distorted pictures resulting
from an angled projection.
See
"Correcting picture distortion" on page 23 for
details.
When the on-screen menu is activated, moves the
selection to the left or right.
8. MENU button
Performs the same action as MENU on the remote
control.
Toggles the On-Screen Display (OSD) menu on
and off. See
"Using the menus" on page 20 .
9. POWER button
Performs the same action as POWER on the
remote control.
Toggles the projector between standby and on.
See
"Turning the projector on" on page 19 and
"Turning the power off " on page 34 for details.
10. SOURCE button
Performs the same action as the source selection
buttons (COMP1, COMP2, VIDEO, HDMI 1,
HDMI 2, RGB HD, S-VIDEO) on the remote
control.
Switches sequentially through input sources.
See
"Selecting an input source" on page 19 for
details.
11. PRESET MODE button
Depending upon which input source is selected,
selects an available picture setup mode. See
"Selecting a preset mode" on page 24 for details.
12. ENTER button
Enacts the selected On-Screen Display (OSD)
menu item.
13. EXIT button
Goes back to previous OSD menus, exits and saves
any changes made using the On-Screen Display
(OSD) menu. See
"Using the menus" on page 20
for details.
1. Foucs ring
Adjusts the focus of the projected image.
2. Zoom ring
Adjusts the size of the projected image.
3. POWER indicator light
Lights up or flashes when the projector is
operating. See
"Indicators" on page 47 for details.
4. TEMPerature warning light
Lights up or flashes if the projector’s temperature
becomes too high. See
"Indicators" on page 47 for
details.
5. LAMP indicator light
Lights up or flashes when the projector lamp has
developed a problem. See
"Indicators" on page 47
for details.
6. LENS SHIFT (up)
LENS SHIFT
(down)
Performs the same action as LENS and / on
the remote control.
Adjusts the motorised vertical lens shift by
moving the image upwards or downwards on the
screen in relation to the orientation of the
projector. See
"Shifting the projection lens
vertically" on page 12 for details.
When the on-screen menu is activated, moves the
selection upwards or downwards.
1
2
3
4
5
6
7 7
6
9
8
10
11
13 12
W20000-en.book Page 9 Monday, October 22, 2007 3:35 PM