BenQ W20000 - Manual (Page 38)

38 Using the projector
Eng
lish
Display menu
System Setup menu
IRIS See "Adjusting contrast ratio via IRIS" on page 29 for details.
Lens Shift See "Shifting the projection lens vertically" on page 12 for details.
FUNCTION
(default setting / value)
DESCRIPTION
Aspect Ratio
(Anamorphic)
There are several options to set the picture's aspect ratio depending on your input
source. See
"Selecting the aspect ratio" on page 30 for details.
Keystone
(0)
Corrects any keystoning of the picture. See "Correcting picture distortion" on
page 23 for details.
Position
(0)
Displays the position adjustment page. To move the projected picture, use the
directional arrow keys. The values shown on the lower position of the page
change with every key press you made until they reach their maximum or
minimum.
Overscan
Adjustment
(depends on the selected
input source)
Conceals the poor picture quality in the four edges. You can also manually press
/ to decide how much to be concealed. Setting 0 means the picture is 100%
displayed. The greater the value, the more portion of the picture is concealed
while the screen remains filled and geometrically accurate.
PIP
Turns the PIP window on or off and makes related adjustments. See "Displaying
more than one image source simultaneously" on page 32 for details.
PC & Component
YPbPr Tuning
H.Size (0)
Adjusts the horizontal width of the picture.
Phase (0)
Adjusts the clock phase to reduce picture distortion.
Auto
Adjusts the phase, and frequency automatically
FUNCTION
(default setting / value)
DESCRIPTION
Language
(English)
Sets the language for the On-Screen Display (OSD) menus. See "Using the menus"
on page 20 for details.
Splash Screen
(BenQ logo)
Allows you to select which logo screen will display during projector start-up.
Three options are available: BenQ logo screen, Blue screen, or My Screen.
My Screen
Captures and stores the projected picture as My Screen. See "Creating your own
startup screen" on page 33 for details.
Projector Position
(Floor Front)
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
"Obtaining a preferred projected image size" on page 12 for details.
Auto Off
(Disable)
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Off " on page 43 for details.
Sleep Timer
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes
and 3 hours.
Background Color
(Blue)
Allows you to choose the color of the background screen that will be displayed
when there is no input signal detected.
W20000-en.book Page 38 Monday, October 22, 2007 3:35 PM