BenQ W20000 - Manual (Page 11)

11 Positioning your projector
Eng
lish Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations:
1.
Floor in front of screen;
2. Ceiling in front of screen;
3. Floor at rear of screen; or
4. Ceiling at rear of screen.
Your room layout or personal preference will dictate which installation location you select. Take into
consideration the size and position of your screen, the location of a suitable power outlet, as well as the location
and distance between the projector and the rest of your equipment.
*To set the projector position:
1. Press MENU on the projector or remote control and then press / until the
System Setup menu is highlighted.
2. Press / to highlight Projector Position and press / until the correct
position is selected.
1. Floor front:
Select this location with the projector placed near the
floor in front of the screen. This is the most common
way to position the projector for quick setup and
portability.
3. Floor rear:
Select this location with the projector placed near the
floor behind the screen.
Note that a special rear projection screen is required.
*Set Floor Rear after you turn the projector on.
2. Ceiling Front:
Select this location with the projector suspended from
the ceiling in front of the screen.
Purchase the BenQ Projector Ceiling Mounting Kit
from your dealer to mount your projector on the
ceiling.
*Set Ceiling Front after you turn the projector on.
4. Ceiling Rear:
Select this location with the projector suspended from
the ceiling behind the screen.
Note that a special rear projection screen and the BenQ
Projector Ceiling Mounting Kit are required for this
installation location.
*Set Ceiling Rear after you turn the projector on.
Language
Splash Screen
My Screen
Projector Position
Auto Off
Sleep Timer
Background Color
Menu Settings
Input Source
System Setup
S-Video
English
BenQ
Auto Source Search
EXIT Back
Disable
Disable
Blue
On
Floor Front
W20000-en.book Page 11 Monday, October 22, 2007 3:35 PM