BenQ W20000 - Manual (Page 37)

37 Using the projector
Eng
lish Picture -- Basic menu
Picture -- Advanced menu
FUNCTION
(default setting/value)
DESCRIPTION
Picture Mode
(Cinema)
Pre-defined picture modes are provided so you can optimize your projector
picture set-up to suit your program type. See
"Selecting a preset mode" on
page 24 for details.
Load Settings From
Selects a picture mode that most suits your need for the picture quality and
further fine-tune the picture based on the selections listed below. See
"Setting the
User 1/User 2/User 3 mode" on page 25 for details.
Brightness
(depends on the selected
input source)
Adjusts the brightness of the picture. See "Adjusting Brightness" on page 26 for
details.
Contrast
(depends on the selected
input source)
Adjusts the degree of difference between dark and light in the picture. See
"Adjusting Contrast" on page 26 for details.
Color
(depends on the selected
input source)
Adjusts the color saturation level -- the amount of each color in a video picture.
See
"Adjusting Color" on page 26 for details.
Tint
(depends on the selected
input source)
Adjusts the red and green color tones of the picture. See "Adjusting Tint" on
page 26 for details.
Sharpness
(depends on the selected
input source)
Adjusts the picture to make it look sharper or softer. See "Adjusting Sharpness"
on page 26 for details.
Reset Picture
Settings Returns all settings in the Picture -- Basic and Picture -- Advanced menus to the
factory preset values. See
"Resetting the picture mode" on page 25 for details.
Rename User Mode
Renames User 1, User 2, or User 3. See "Renaming user modes" on page 25 for
details.
FUNCTION
(default setting / value)
DESCRIPTION
Black Level
(0 IRE)
Sets the picture grayscale as 0 IRE or 7.5 IRE. See "Setting Black Level" on page 27
for details.
Clarity Control Adjusts the picture clarity. See "Controlling image clarity" on page 27 for details.
Color Temperature
(depends on the selected
Picture Mode)
There are several color temperature settings available. See "Selecting a color
temperature*" on page 27 for details.
Color Temperature
User_ Fine Tuning See "Setting a preferred color temperature" on page 28 for details.
Gamma Selection
(depends on the selected
Picture Mode)
See "Selecting a Gamma setting" on page 29 for details.
Brilliant Color
(On)
See "Adjusting Brilliant Color" on page 29 for details.
Color Management See "Color Management" on page 28 for details.
Dynamic Black
(On)
See "Adjusting contrast ratio via IRIS" on page 29 for details.
W20000-en.book Page 37 Monday, October 22, 2007 3:35 PM