BT Hub Phone 2.1 - Manual (Page 50)

46
Call Waiting
Call Waiting lets you know if an incoming call arrives while
you are already on the phone. You will hear a soft beep
every 5 seconds (the beep is not audible to the person
you are speaking to) and the second caller’s details will be
shown on the handset display.
You can put the current call on hold and speak to the
second caller, or reject the second call.
If you have more than one handset, the other handsets
will ring unless the maximum number of calls is already
in progress.
Call Waiting is set automatically, you can turn this feature
off by using #43#. When you turn Call Waiting off you will
hear a beep.
To switch between the current and waiting callers
1 Press Switch to answer the waiting call and put your
current caller on hold. Press Switch or the R (Recall)
button again to toggle between the two calls.
To end the current call when switching between callers,
press
. Then press Yes to reconnect to the other
caller or No to end the other call.
If you do not press any button for 30 seconds, the
waiting call is routed to all handsets registered to the BT
Hub 2.0.
To end the current call and speak to the waiting caller
1 When you get a call waiting, press to end the
current call.
2 When your handset rings with the second call, press
. The second caller is only charged from the second you
answer, not while they are waiting to be connected.