BT Hub Phone 2.1 - Manual (Page 38)

34
Find handset (Paging)
1 Press the Find Handset button on the side of your Hub.
All handsets registered to the Hub will ring, helping you
locate a missing handset.
The handsets will ring for 1 minute or or until any
button on the handset is pressed on any handset or
Find
Handset is pressed again on the Hub.
Key lock
You can lock the keypad so that it cannot be used
accidentally while carrying the handset around.
Important: while the keypad is locked you can still
make calls to emergency numbers (999 /112).
To switch key lock on and off
1 Press and hold . When the keypad lock is active, the
icon is displayed.
2 To unlock, press Unlock and then .
While the keypad is locked you will still be able to
answer external calls. When you end the call the
keypad will remain locked.
Handset ringer
If you do not want to be disturbed, you can switch the
handset ringer off.
To switch the handset ringer on/off
1 When the handset is in standby mode, press and
hold . When the handset ringer is off, the icon
is displayed.
2 To switch the ringer back on, press and hold again.