BT Calypso 120 - Manual (Page 57)

57
BT Calypso 120 – Edition 04 – 04.10.04 – 6329
Help
Problems Possible cause
You cannot link up Is the display flashing ? Check that the base is
with the base connected to the mains power and switched on.
Are you are out of range? Move the handset closer to
the base.
Are the batteries low or flat? If so, charge the batteries
or replace them if necessary.
If using more than one base, check that you are connected
to the correct base, see page 55.
No ring on the handset Check that the ringer volume is switched on, see page 45.
Check that the base is plugged into the phone socket
and that it is also connected to the mains power and
switched on.
Buzzing noise on my Sometimes, your BT Calypso 120 and other DECT GAP
radio, TV, computer compatible handsets can interfere with other electrical
or hearing aid equipment if placed too close. Try moving it at least one
metre away from such appliances.
The charging does not Check that the base is plugged into the mains socket
appear to be working and switched on.
6329 Calypso 120 UG 4/10/04 4:25 pm Page 57