BT Calypso 120 - Manual (Page 54)

54
BT Calypso 120 – Edition 04 – 04.10.04 – 6329
4. If you have more than one base, scroll or to
select the base. Press OK .
5. Enter the base’s SYSTEM PIN (original setting 0000).
Press OK .
Register handset with an additional base
A handset registered with one base can then be registered
with up to three more bases, e.g. at work, at home, at a
relative’s home.
1. Press Menu then scroll to Registration and press OK .
2. Register Handset is highlighted. Press OK .
3. Scroll or to select the base. Press OK .
4. Enter the selected base’s SYSTEM PIN (original setting
0000). Press OK .
5. At the base: press and hold until you hear the base
beep. The handset screen shows the base ID number,
press
OK . The handset reverts to standby and
is given the first available handset number. It is now
registered to the new base and ready for use.
Additional handsets and bases
To register a GAP compatible
handset to your BT Calypso base,
please refer to the instructions
supplied with the handset you are
trying to register.
All the bases that a handset can be
linked to are indicated by an
✱.
6329 Calypso 120 UG 4/10/04 4:25 pm Page 54