BT Calypso 120 - Manual (Page 49)

49
BT Calypso 120 – Edition 04 – 04.10.04 – 6329
Handset priority
Normally, if you have more than one handset registered
to your base, they all ring at the same time. However, you
can set one of them to ring before the others, so that calls
can always be answered at one handset first.
1. Press Menu then scroll to Base Settings and
press OK. Press to highlight Handset Priority
then press OK .
Display highlights All Handsets . Press OK to select All
Handsets to make all handsets ring together.
Or
2. Scroll to Select Handset and press OK . Scroll or
to the handset you want to ring first. Press OK .
3. Scroll or to select the number of rings at the
handset before the other handsets start ringing. Press OK
to confirm.
System PIN
The System PIN is used for registering and deregistering
handsets and some other optional settings. The default
System PIN is 0000.
1. Press Menu then scroll to Base Settings and press
OK . Press to highlight System PIN then press OK .
Base settings
Protecting your settings
When entering a PIN the digits are
shown as asterisks.
Keep track of your PIN
If you change the System PIN,
keep a record of new number by
writing in the space provided on
page 68. You need your System
PIN for registering handsets and
for some other optional settings.
6329 Calypso 120 UG 4/10/04 4:25 pm Page 49