BT Calypso 120 - Manual (Page 23)

BT Calypso 120 – Edition 04 – 04.10.04 – 6329
If you subscribe to your network’s
Caller Display service, and want
the names in your Phonebook
displayed instead of the phone
numbers, you must store the full
telephone number including the
national code. Your own directory, stored in a handset.
Each Calypso handset can store up to 150 names and
numbers. Names can be up to 16 characters long and
numbers up to 20 digits.
Add entry
1. Press Names .
2. If the Phonebook is empty, Add Entry is highlighted.
Press OK .
Or
3. If names have been stored, they are listed.
Press Options . Add Entry is highlighted. Press OK .
4. Use the keypad to enter the name, then press OK .
5. Use the keypad to enter the number, then press OK .
The screen shows the Names list.
6. Press and hold Back to return to standby.
Dial
1. Press Names .
2. Scroll or to the name you want or use the keypad
to enter the first letter of the name, e.g. press four
times for names beginning with S .
3. Press to dial.
Phonebook
Writing tips
Entering names
Use the keypad letters to enter
names, e.g. to store TOM:
1. Press once to enter T .
2. Press three times to enter O .
3. Press once to enter M .
If you make a mistake, press Clear
to delete the last character or digit.
Press to switch between upper
and lower case letters.
The icon will be displayed when
you have selected upper case.
23
6329 Calypso 120 UG 4/10/04 4:25 pm Page 23