Brocade Communications Systems Brocade ICX 6650 6650 - Manual (Page 273)

Brocade ICX 6650 Security Configuration Guide 253
53-1002601-01
Displaying multi-device port authentication information
Displaying multi-device port authentication
configuration information
To display information about the multi-device port authentication configuration, enter the show
auth-mac-address configuration command.
Syntax: show auth-mac-address configuration
TABLE 59 Output from the show authenticated-mac-address command
Field Description
Port The port number where the multi-device port authentication feature is enabled.
Vlan The VLAN to which the port has been assigned.
Accepted MACs The number of MAC addresses that have been successfully authenticated
Rejected MACs The number of MAC addresses for which authentication has failed.
Attempted-MACs The rate at which authentication attempts are made for MAC addresses.
Brocade# show auth-mac-address configuration
Feature enabled : Yes
Number of Ports enabled : 4
--------------------------------------------------------------------------
Port Fail-Action Fail-vlan Dyn-vlan MAC-filter
--------------------------------------------------------------------------
1/1/8 Block Traffic 1 No No
1/2/1 Block Traffic 1 No No
1/2/2 Block Traffic 1 No Yes
1/2/5 Block Traffic 1 No No