Brocade Communications Systems Brocade ICX 6650 6650 - Manual (Page 229)

Brocade ICX 6650 Security Configuration Guide 209
53-1002601-01
Displaying port security information
NOTE
After every switchover or failover, the MAC “Age-Left” timer is reset to start since it is not
synchronized between the master and the standby stack unit.
Displaying port security statistics
You can display port security statistics for an interface or for a module.
For example, to display port security statistics for interface 1/1/7, enter the following command.
Syntax: show port security statistics port
Specify the port variable in stack-unit/slotnum/portnum format.
For example, to display port security statistics for interface module 7, enter the show port security
statistics command.
TABLE 41 Output from the show port security mac command
Field Description
Port The slot and port number of the interface.
Num-Addr The number of MAC addresses secured on this interface.
Secure-Src-Addr The secure MAC address.
Resource Whether the address was secured using a local or global resource.Refer to
“Local and global resources used for MAC port security” on page 202 for more
information.
Age-Left The number of minutes the MAC address will remain secure.
Shutdown/Time-Left Whether the interface has been shut down due to a security violation and the
number of seconds before it is enabled again.
TABLE 42 Output from the show port security statistics port command
Field Description
Port The slot and port number of the interface.
Total-Addrs The total number of secure MAC addresses on the interface.
Maximum-Addrs The maximum number of secure MAC addresses on the interface.
Violation The number of security violations on the port.
Shutdown/Time-Left Whether the port has been shut down due to a security violation and the
number of seconds before it is enabled again.
Brocade# show port security statistics e 1/1/7
Port Total-Addrs Maximum-Addrs Violation Shutdown/Time-Left
----- ----------- ------------- --------- ------------------
1/1/7 1 1 0 no