Hemstitching 2 – Brother PC-2800 User Manual
Page 66
63
Hemstitching 2
2. Pull out several threads from both sides of the 4 mm (3/16'')
area which is not yet open. (Pull out four threads, leave five
threads and then pull out four threads, the width of five threads
is approximately 4 mm (3/16'') or less.)
1
Approx. 4 mm (3/16'') or less
2
Four threads (pull out)
3
Five threads (leave)
3. Sew the decorative stitch on the center of the five threads cre-
ated above.
*
Using a wing needle is an option.
4. Illustration of finished product.
5. Illustration of finished product.
25
25 26
27 28
29 30
1
2
1
1. Press the
27
28
key to turn on the LED lamp, and press the
stitch pattern switch key to select the stitch for hemstitching.
*
Check that the stitch pattern switch key's LED lamp is lit.
1
Lamp is lit
2
Lamp is lit
This manual is related to the following products: