Brother PC-2800 User Manual
Page 17
14
2
5
1
4. While holding the end of the thread with your left hand, pass
the thread through the guides in the order shown by the num-
bers.
Note
-
If the thread is pushed down at 1 to make it taut, it can be
passed around the other thread guides more easily.
-
Incorrectly feeding the thread will result in faulty sewing.
1
Thread take-up lever
Threading the take-up lever
5. Lower the presser foot.
6. Guide the thread through the needle clamp thread guide.
1
Needle clamp thread guide
7. When using the auto-threading device, gently pull the thread
towards you.
1
Needle threader lever
2
Guide (Large hook)
*
Lowering the presser foot will engage the automatic tension
and will allow you to grip the thread as you proceed.
1
2
1
2
4
1
1
5
This manual is related to the following products: