Philips Flat TV - Manual (Page 8)

5
Camcorder, video games, headphone
The keys on the TV set
Should your remote be lost or broken you can still change
some of the basic settings with the keys on the side of your
TV.
Press:
• the
- VOLUME + key to adjust the volume;
• the - PROGRAM + key to select the TV channels or sources.
Press the MENU key to summon the main menu without the
remote control.
Use:
• the
VOLUME + key and the - PROGRAM + key to select
menu items in the directions as shown;
• the MENU key to remove the menu.
Camcorder,Video games
The AV and S-VIDEO connections are located at the right
side of the TV or, for large screen sizes at the bottom;
Make the connections as shown opposite.
With the v key, select
AV .
For a monophonic device, connect the audio signal to the AUDIO
L input. The sound automatically comes out of the left and right
speakers of the set.
Headphone
The - V + keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 ohms.
S-VHS
Video
R Audio L
*
VHS, 8 mm
S-VHS
Video
R Audio L
*
S-VHS, Hi-8
Rear connections
Recorder (
VCR
-
DVD
+
RW
)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible to signals from the
display. Keep a minimum distance of 0,5 m from the screen.
EXT 1
CABLE
RECORDER DECODER
1
3
2
Connect the aerial cables 1, 2 and, to obtain the
optimum picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only
possible connection is via the aerial cable.
You will therefore need to tune in your recorder’s test
signal and assign it programme number 0 or store the test
signal under a programme number between 90 and 99, see
Manual store, p. 7.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special
euroconnector of your recorder. See also the recorder
handbook. You can also connect your decoder directly to
EXT1 or 2 with a eurocable.