Burley CUB - Manual (Page 7)

7
Burley Cub Owner’s Instruction and Safety Manual
Installing the Cover
To install the cover, unfold it and
snap the top two snaps fi rst. Next,
pull the cover toward the back of
the trailer and snap the two rear
snaps. Finally, using the B-tabs in
front, pull the cover taut by snap-
ping the B-tabs over the edge of
the frame rails.
Folding and Stowing the Front Window
Folding and stowing the front window is quick and easy. Begin by unzipping the
window. Next, fold the window in half toward the back of the trailer. Then roll the
window up toward the top of the trailer. Hold the window in place by inserting the
elastic straps into the Velcro holders on the top of the trailer.
Using the Adjustable Sunscreen
Your Burley Cub is equipped with an adjust-
able sunscreen to keep your kids in the shade
during bright, sunny days. To move the
Adjustable Sunscreen, simply pull on the tabs
to move it up or down on the trailer as neces-
sary. If more visibility is required, pull the
sunscreen up in the middle. This is depicted
in the illustration at right.
Parking Brake Installation and Operation
The roll cage should be fully unfolded; remove the Big Screen 2-in-1 Cover; remove
the tongue, and leave the wheels in running position.
1. Put the trailer on its nose on the fl oor with the roll cage leaning against a wall
or table. If you are working on a rough or dirty surface, lay trailer on a cloth or
other protective barrier.
2. Facing the underside of the bucket, identify the rear-most row of six molded
depressions (see illustration on page 8). These depressions have 1/4” dimples
molded into their centers.
B-tabs
Adjustable
Sunscreen