Burley CUB User Manual

Page 5

Burley Cub Owner’s Instruction and Safety Manual

2. Secure it and lock the pin by

rotating it toward the rear of the

trailer as shown in the drawing on

the right.

3. Slip the safety pin though the

forward hole in the tongue and

lock in place. Refer to the illustra

tion showing the locked position

of the safety pin. Firmly pull on the

tongue to ensure that it is secure.

Important: The tongue retaining pin is captured between

the tongue receptacle and the lip of the poly shell. It should

never be completely removed from the tongue receptacle.

Tongue retaining pin must be locked into place before using

trailer. If pin is not properly locked, trailer could separate from

bicycle, resulting in an accident or serious injury. Safety pin is a

backup for the retaining pin. Under no circumstances should the

trailer be towed with only the safety pin engaged.

Installing the Safety Flag

Insert the safety fl ag pole through the loop of ½” webbing on the outside of the

trailer and into the fl ag pocket at the bottom left hand corner of the trailer as shown

below. DO NOT USE YOUR TRAILER WITHOUT THE SAFETY FLAG IN PLACE.

Forward hole in tongue

Retaining Pin

Safety Pin

OPEN

LOCKED