Boyo VTR1004 - Manual (Page 52)

52
14. NETWORK UPGRADE
(1) Connect the network using ADMIN password.
(2) Input IP address, p ort & password and press “OK” button.
(3) Then Click “Upgrade” button as below.
(4) Open the first system upgrade image file
“MRX_2.X.X.default.bin”.
(5) Wait while the system is being upgraded.
a. “File Transfer” bar shows you the status of file transfer.
b. “System Upgrade” progress bar shows you the status of system upgrade.
Please be patient while the system is being upgraded.
c. Click OK, Then the DVR will restart automatically.
(6) Connect the DVR and c lick “Upgrade” button again.
(7) Open the second system upgrade image file
“MRX_2.X.X.bin”.
(8) Wait while the system is being upgraded.
(9) After upgrade files, the DVR will restart automatically.
(10) Connect the DVR and c lick “Upgrade” button again.
(11) Open the third system upgrade image file “MRX_2.X.X.lang.bin”
(12) Wait while the system is being upgraded.
(13) After upgrade files, the DVR will restart automatically.
Upgrade
Button