Power on/off – Boyo VTR1004 User Manual
Page 11

11
POWER ON/OFF
1. TURNING ON THE POWER
① Make sure that peripherals are properly connected.
② Switch「ON」on the rear panel. The front POWER LED will light up in green. Please
wait approximately 50 seconds until it start up.
< LIVE DISPLAY SCREEN >
2. TURNING OFF THE POWER
① In the LIVE mode, press the MENU/ENTER button, and then it goes to MAIN MENU.
② Select SHUTDOWN and press the MENU/ENTER button, and then the password
pop-up window is displayed as below. Enter administrator’s password and press
MENU/ENTER button. It allows you to turn off the system safely.
< SYSTEM SHUTDOWN POP-UP WINDOW >
④ Switch「OFF」on the rear panel.
NOTE
If the covert is set to「ON」in the camera settings, no camera image is displayed.
NOTE
There is no default password at factory default. Press MENU/ENTER button again
when password pop-up window is displayed.