Boyo VTR1004 - Manual (Page 17)

17
(NTSC) or 25IPS (PAL). If you want to set the camera 1 as 30ips, firstly set other
cameras as 0ips at Manual and Event record setting.
③ QUALITY: This sets the image quality in four steps such as SUPER, HIGH,
MEDIUM and LOW. Use the left and right arrow button for setting the option.
④ RECORD: Do not record the images, set it as OFF.
⑤ NETWORK: Do not transmit the video data over the network, set is as OFF.
⑥ VOICE IN: To record with voice, set it as ON. Only 1 channel voice record is
available.
3.2.3. EVENT
This menu sets the configurations for the event recording. To enable the event recording,
you must turn on the event sources.
< EVENT MENU SCREEN >
Press the NUMERIC Button (1~4) to select a desired camera.
[ex) EVENT<1> means the event type of camera No.1]
Ser set the IMAGE RATE, QUALITY, RECORD ON/OFF and NETWORK ON/OFF.
Press MENU/ENTER button at EVENT OFF to go in to the event type menu.