Brother DCP 8060 - Manual (Page 30)

Chapter 3
18
Tray use in Copy mode
3
You can change the priority tray that the
machine will use for printing copies.
When you select Tray#1 Only, MP Only or
Tray#2 Only
1
, the machine loads the
paper only from that tray. If the selected tray
is out of paper, No Paper will appear on the
LCD. Insert the paper in the empty tray.
To change the tray setting follow the
instructions below:
a
Press Menu, 1, 5, 1.
15.Tray Use
1.Copy
a MP>T1
b T1>MP
Select ab & OK
b
Press a or b to select Tray#1 Only,
Tray#2 Only
1
, MP Only,
MP>T1>T2
1
or T1>T2
1
>MP
.
Press OK.
1
Tray#2 Only
or T2 appears only if the
optional tray is installed.
c
Press Stop/Exit.
Note
• When loading the documents from the
ADF and MP>T1>T2 or T1>T2>MP is
selected, the machine looks for the tray
with the most suitable paper and pulls
paper from that tray. If no tray has suitable
paper, the machine pulls paper from the
higher priority tray.
• When using the scanner glass, your
document is copied from the higher
priority tray even if more suitable paper is
in another paper tray.
Tray use in Print mode
3
You can change the default tray the machine
will use for printing from your computer.
a
Press Menu, 1, 5, 2.
15.Tray Use
2.Print
a MP>T1
b T1>MP
Select ab & OK
b
Press a or b to select Tray#1 Only,
Tray#2 Only
1
, MP Only,
MP>T1>T2
1
or T1>T2
1
>MP
.
Press OK.
1
Tray#2 Only
or T2 appears only if the
optional tray is installed.
Note
• The setting in the printer driver will take
priority over the setting made on the
control panel.
• If the control panel is set to
Tray#1 Only
, Tray#2 Only, MP Only
or MP>T1>T2 and you choose ‘Auto
Select’ in the printer driver, the tray use
will be MP>T1>T2.
If the control panel is set to T1>T2>MP and
you choose ‘Auto Select’ in the printer
driver, the tray use will remain T1>T2>MP.