Burley SOLO - Manual (Page 9)

9
Burley Solo Owner’s Instruction and Safety Manual
Installing the Safety Flag
Insert the safety fl ag pole through the loop of ½” webbing on the outside of the
trailer and into the fl ag pocket at the bottom left hand corner of the trailer as shown
below. DO NOT USE YOUR TRAILER WITHOUT THE SAFETY FLAG IN PLACE.
Folding Your Burley Solo™
Folding your Burley Solo™ is basically the reverse of unfolding it. Familiarize yourself
with unfolding the trailer as outlined above. To fold your trailer:
1. Remove the safety fl ag and handle.
2. Remove the tongue by pulling out the hairpin cotter and lock pin and reversing
the process described previously.
3. Remove the wheels and store them in a safe place with the handle.
4. Remove the cover and store in a safe place.
5. Unclip the sides of the seat at the top of the frame.
6. Unclip the frame locks at the top rear of the frame.
7. Push the rear part of the trailer forward and down while simultaneously pushing
the top of the trailer down.
We recommend reinserting the safety pins in their receptacles
for storage or transport to avoid snagging.
You can partially fold your Burley Solo™ as needed. Your options are to fold only
the top, remove only the tongue and hitch, remove the quick release wheels, or any
combination of the above. Do not operate your trailer in a partially folded condition.
V. Using the Seat Harness
IMPORTANT: Only passengers who are able to wear a hel-
met and sit upright, unassisted should ride in a child trailer.
Adequate neck strength is required to hold head upright while
trailering. A phy si cian should evaluate anyone who is of ques-
tionable developmental age for trailering.