Burley SOLO - Manual (Page 5)

5
Burley Solo Owner’s Instruction and Safety Manual
Frame locks
snapped into
closed position
onto rear tube.
IV. Unfolding and Folding Your Burley Solo
Your Burley Solo is designed with a super strong, lightweight aluminum frame, com-
plete with a roll cage and bright colored polyester software. Setting it up or folding
it down is accomplished in a few easy steps as follows:
Unfolding
To unfold, rotate the front tube upward and the rear tube back until they meet on
the two black plastic saddles as shown below. Then rotate the two frame locks to
snap onto the rear tube as shown below. The frame locks should connect adjacent
to, and to the outside of, the two plastic saddles.
After the frame locks have been locked in place, clip the sides of the seat into the top
frame as shown below. Adjustment and use of the seat will be covered in Section VI.
Padded Seat and Shoulder Harness, Reclining Seat, and Helmet Pocket.
Front Tube
Rear Tube
Main Frame
Frame Lock
Seat clips attach
to the top of the
frame.
Seat clips